2021 Ikhwalithi ephezulu ye-Dry Film Resist - Ifilimu Eyomile Isetshenziswa Ku-FPC Ne-PCB - I-Lucky Innovative
2021 Ikhwalithi ephezulu ye-Dry Film Resist - Ifilimu Eyomile Isetshenziswa Ku-FPC Ne-PCB - I-Lucky Innovative
2021 Ikhwalithi ephezulu ye-Dry Film Resist - Ifilimu Eyomile Isetshenziswa Ku-FPC Naku-PCB - Imininingwane Yenhlanhla:
Isicelo somkhiqizo
Kusetshenziswa Ebhodini Lesifunda Eliphrintiwe kanye Nebhodi Lesifunda Eliphrintiwe Le-Flexible, ngenzuzo yokusebenza okuhle kakhulu kokunakekela, ukulungiswa nokunamathela.
Ukwakheka Komkhiqizo
Ukucaciswa komkhiqizo
| Ikhodi Yomkhiqizo | I-LK-D1238 LDIIfilimu Eyomile | I-LK-G1038 Ifilimu Eyomile |
| Ubukhulu (μm) | 38.0±2.0 | |
| Ubude (m) | 200ｍ | |
| Ububanzi | Ngokwesicelo samakhasimende | |
Amapharamitha womkhiqizo
(1) Ifilimu Eyomile ye-LK-D1238 LDI
I-LK-D1238 LDI Dry Film ilungele umshini wokuchayeka ngezithombe eziqondile, enobude obungamaza omabili angu-355nm no-405nm.
| Into kanye nendlela yokuhlola | Idatha yokuhlola | |||
| Isikhathi esifushane sokuthatha izithombe (1.0wt.% Na2CO3 isixazululo samanzi, 30℃) *2 | 25s | |||
| Ubude begagasi (nm) | 355 | 405 | ||
| Ukusebenza ngemuva kwe-Imaging | Ukuzwela kwesithombe (*2×2.0) | ST=7/21 Amandla okuveza*3 | 20mJ/cm2 | 15mJ/cm2 |
| Ukulungiswa(*2×2.0) | ST=6/21 | 40μm | 40μm | |
| ST=7/21 | 40μm | 40μm | ||
| ST=8/21 | 50μm | 50μm | ||
| Ukunamathela(*2×2.0) | ST=6/21 | 50μm | 50μm | |
| ST=7/21 | 40μm | 40μm | ||
| ST=8/21 | 35μm | 35μm | ||
| 【Ukuthembeka Kokugcina】*3 10 izimbobo (6mmφ) Izinga lokugqabuka kwembobo (*2×2.0×3 izikhathi) | ST=6/21 | 0% | 0% | |
| ST=7/21 | 0% | 0% | ||
| ST=8/21 | 0% | 0% | ||
| Isikhathi sokuphela sokukhipha (3.0wt.%NaOH isixazululo samanzi, 50℃) | ST=7/21* 1 Amandla okuveza | 50s | 50s | |
(2) I-LK-G1038 Ifilimu Eyomile
I-LK-G1038 Ifilimu Eyomile ifaneleka ukuxhumana nomshini wokuchayeka, one-wavelength eyinhloko engu-365nm.
| Into kanye nendlela yokuhlola | Idatha yokuhlola | ||
| Isikhathi esifushane sokuthatha izithombe (1.0wt.% Na2CO3 isixazululo samanzi, 30℃) *2 | 22s | ||
| Ukusebenza ngemuva kwe-Imaging | Ukuzwela kwesithombe (*2×2.0) | ST=8/21 Amandla okuveza*3 | 90mJ/cm2 |
| Isixazululo (*2×2.0) | ST=6/21 | 32.5μm | |
| ST=7/21*1 | 32.5μm | ||
| ST=8/21 | 35μm | ||
| Ukunamathela (*2×2.0) | ST=6/21 | 45mm | |
| ST=7/21 | 40μm | ||
| ST=8/21 | 35μm | ||
| (Tending Reliability)*3 10 izimbobo (6mmφ) Izinga lokugqabuka kwembobo (*2×2.0×3 izikhathi) | ST=6/21 | 0% | |
| ST=7/21 | 0% | ||
| ST=8/21 | 0% | ||
| Isikhathi sokuphela sokukhipha (3.0wt.%NaOHwater solution, 50℃) | ST=7/21*1 Amandla okuveza | 50s | |
(Idatha engenhla ingeyereferensi kuphela)
Qaphela:
*1: I-Stouffer 21 Stage Exposure Energy Scale.
*2×2.0: Isithombe esinesikhathi esiphindwe kabili sesikhathi esifushane sokucabanga.
*3: Uma kugxilwe Ekuthembekeni Kokubamba, kuyanconywa ukusebenzisa inani lamandla okuchayeka lesiteji esingu-7~8.
*4: Idatha engenhla ihlolwe yimishini yethu kanye namathuluzi.
Inqubo Yohlelo Lokusebenza
Isexwayiso Esicelweni
(1) Isicelo : Sebenzisa le filimu kuphela njengokumelana nezinto ezihlobene nebhodi lesifunda eliphrintiwe kanye nokunye ukwakheka kwephethini.
(2) Ukwelashwa ngaphambi kwesikhathi : Izinsalela zezinto eziphilayo, amabala ngenxa yokungamanzi ngokwanele nokomisa endaweni yethusi, kungabangela ukubola kwe-polymerization kanye nokungena kwesisombululo sokucwenga noma sokunamathisela.Sicela wome ngokuphelele ngemva kokugeza ngamanzi. Ikakhulukazi, lapho umswakama uhlala ngaphakathi kwembobo, kubangela ukuphuka kwetende.
(3) Ukushisa kwe-substrate : Ukushisa ngaphambi kwesikhathi ekushiseni okuphezulu kakhulu isikhathi eside kungase kubangele ukugqwala. Kufanele kwenziwe ngaphansi kwemizuzu eyi-10 ku-80 ℃ futhi ngaphansi kwamaminithi angu-3 ku-150 ℃. Futhi lapho izinga lokushisa elingaphezulu kwe-substrate ngaphambi kokucwazimula lingaphezu kuka-70℃, ukujiya kwefilimu onqenqemeni lwembobo kungase kube mncane kakhulu futhi kungase kubangele ukuphuka kwamatende.
(4) Ukubamba ngemva kokucwenga kanye nokuchayeka : Bamba ngesihlangu esikhanyayo noma ngaphansi kwesibani esiphuzi (amamitha angu-2 noma ibanga elingaphezulu elidingekayo). Isikhathi esiphezulu sokubamba esimweni sokugcina (ngaphansi kwesibani esiphuzi) yizinsuku ezi-4. Ukuchayeka kufanele kwenziwe phakathi kwezinsuku ezi-4 ngemva kokulanyiswa.Ukuthuthukiswa kufanele kwenziwe phakathi kwezinsuku ezi-3 ngemva kokuchayeka. Umsebe wesibani esimhlophe esingewona u-ultraviolet uneminye imisebe ye-ultraviolet, ngakho-ke bamba ngesivikelo sokukhanya ngeshidi elimnyama ngaphansi kwalo.Gcina izinga lokushisa lingu-23±2℃ kanye nomswakama ohlobene no-60±10%RH. Ama-substrates aminated kufanele abekwe endaweni yokubeka ngayinye.
(5) Ukuthuthukiswa : Uma izinga lokushisa likanjiniyela lingaphezu kuka-35℃, kungenza iphrofayela yokumelana ibe yimbi kakhulu.
(6) Ukuhlubula : Hlikihla phakathi nesonto elilodwa ngemva kokucweba.
(7) Ukwelashwa kwemfucuza : Izingxenye zefilimu ezomile kumthuthukisi kanye ne-stripper zingahlanganiswa ngokungathathi hlangothi. Izingxenye ezihlangene zingahlukaniswa nesisombululo esinamanzi ngendlela yokucindezela isihlungi kanye nendlela ye-centrifugal. Isixazululo samanzi esihlukanisiwe sinamanani athile e-COD ne-BOD, ngakho-ke kufanele kulahlwe udoti ngendlela efanele.
(8) Umbala wefilimu : Umbala uluhlaza/luhlaza okwesibhakabhaka. Nakuba umbala ungase ushintshe kancane kancane ngokuhamba kwesikhathi, akufanele ube nomthelela kusici.
Isexwayiso On Storage
(1) Uma isitoreji senziwa endaweni emnyama, epholile, neyomile ezingeni lokushisa elingu-5℃ 20℃ kanye nomswakama ohlobene ongu-60%RH noma ngaphansi, ifilimu eyomile kufanele isetshenziswe phakathi kwezinsuku ezingu-50 ngemva kokukhiqizwa.
(2) Gcina amaroli efilimu avundlile ngokusebenzisa ama-rack noma amabhodi okusekela ukuze uwagcine. Uma ebekwe zibheke phezulu, amashidi efilimu eyomile angase ashibilike ngalinye futhi ukumila kwawo kungase kufane nehlumela loqalo (imiqulu ibekwe phansi ivundlile ephaketheni).
(3) Khipha amaroli efilimu eshidini elimnyama ngaphansi kwesibani esiphuzi noma uhlobo olufanayo lwesibani sokuphepha. Ungawashiyi ngaphansi kwesibani esiphuzi isikhathi eside. Mboza amaroli efilimu ngeshidi elimnyama uma uwagcina isikhathi eside.
Izithombe zemininingwane yomkhiqizo:
Umhlahlandlela Womkhiqizo Ohlobene:
Sisekela abathengi bethu ngemikhiqizo esezingeni eliphezulu yekhwalithi kanye nenkampani esezingeni eliphezulu. Ukuba ngumkhiqizi onguchwepheshe kulo mkhakha, sithole ulwazi olucebile lokusebenza olusebenzayo ekukhiqizeni nasekuphatheni i-2021 Ikhwalithi ephezulu ye-Dry Film Resist - Ifilimu Eyomile Esetshenziswa Ku-FPC Futhi I-PCB - Lucky Innovative , Umkhiqizo uzohlinzeka kuwo wonke umhlaba, njenge: Auckland , Bangladesh , Poland , Ngokuthuthuka komphakathi, ukuzinikela, ukuzinikela komoya, inkampani yethu izoqhubeka nokusebenza kahle, ukuzinikela komoya ibhizinisi, futhi sizohlale sinamathela embonweni wokuphatha "ungathanda ukulahlekelwa igolide, ungalahlekelwa inhliziyo yamakhasimende". Sizosebenzela osomabhizinisi basekhaya nabangaphandle ngokuzinikela okuqotho, futhi masidale ikusasa eliqhakazile kanye nawe!
Ngu-Nicci Hackner wase-Bangkok - 2017.01.11 17:15 Kule webhusayithi, izigaba zomkhiqizo zicacile futhi zicebile, ngingathola umkhiqizo engiwufunayo ngokushesha futhi kalula, lokhu kuhle kakhulu ngempela!
Ngu-Isabel wase-Salt Lake City - 2018.09.21 11:01 -
Umkhiqizi wefilimu ye-Pcb Photoresist - Dry Fi...
-
Umthombo wefekthri Ikhadi le-Hico Magnetic - Magnetic S...
-
Intengo Engcono Kakhulu Ephepheni Le-Fujicolor - I-Pressure Measu...
-
Ifilimu yaseShayina edayisa yonke iMagnetic Shielding - EM...
-
I-China Intengo Eshibhile I-Car Interior Film - I-Auto Int...
-
Ikhadi le-ID yemboni ye-Magnetic - Magnetic ...